Custom Hydraulic Rotating Scissor Lifts
Overview These robust, custom, hydraulic rotating scissor lifts were engineered to position zinc plates for the smelting industry. These scissor lifts can raise and lower up to 6000 lbs., as well as rotate the zinc plates into position during the smelting process. These lifts will run 29 cycles/hr., 12 jogs/cycle, 24 hrs./day, and 310 days/year. […]
Custom Scissor Lift with Rotator
Overview This Custom Scissor Lift with Rotator will be used to stack zinc plates in a smelting process. Built with heavy-duty steel to withstand the rigours of a smelting operation, the lifts include the rotator on top of the platform. These lifts will run 129 cycles/hour, 24 hours a day, 310 days a year. Features […]
Engine Rollover and Lift Stations
Overview Handling Specialty recently completed a 15 and 30 Ton Engine Rollover Station for the energy industry, which was placed in a state-of-the-art manufacturing facility. Handling Specialty also provided installation and commissioning of these products. The Engine Rollover Stations will be used to position reciprocating engines during manufacturing operations. Features The rollover feature, along with […]
Tilt and Rotate Platform for Nuclear Industry
Overview Handling Specialty engineered and manufactured a unique portable tilt and rotate platform for draining dry storage containers (DSC) that hold spent nuclear fuel rods at a nuclear facility in Ontario. The process begins when a full container is lifted from a pool of water via a crane and placed on the rotator. An operator […]
Rotating Mast Lift for Tooling Inspection
Overview Handling Specialty engineered and manufactured a custom two-post rotating mast lift for an international power company’s (GE) power generation facility for turbine equipment inspection. Features Mechanical actuation is used for positive locking, which allows the tooling to be held at any elevation for extended periods of time. The lift must be in full “up” […]
Custom Tooling Positioner
Overview This ergonomic tooling rotisserie will be used to position composite parts during assembly operations. Taking up a fixed position lagged to the assembly facility floor, this rotisserie will operate intermittently, capable of lifting and holding up to 700 lbs. and rotating 360 degrees in both clockwise and counter-clockwise directions. This unit also includes 6 […]