Aerospace Personnel Lift for Assembly
Overview These 2 custom personnel lifts, lag bolted to the shop floor, were exclusively designed for our client’s specific aerospace assembly requirements. They have a duty cycle of up/down twice every 10 minutes, 20 hours per day, 260 days per year. Features Up/down travel limit switches Velocity fuses Safety lock-up bars Controls mounted on the […]
Industrial Personnel Lift with Tilt Action
Overview This industrial personnel lift with tilt/upender component acts as a vertical assembly station to assemble large industrial fuel cells in the Energy industry. This is a custom design/build material handling solution for a new model of large scale fuel cells developed to vertically stack the components. Personnel Lift Features Lowered Height: 68″; Vertical Travel: […]
Assembly Platform for Energy Industry
Overview Handling Specialty custom-engineered and manufactured this pit-mounted, vertical assembly platform to operate intermittently. This vertical platform rises around the energy turbine as it is assembled, and can accommodate several sizes of turbine. It raises and lowers on three scissor lifts via the motor starter panel mounted on HPU. Controls for up/down, start, and E-stop […]
Work Platform for Turbine Assembly
Overview Engineered to ergonomically and efficiently perform precise assembly and maintenance operations of turbines in the vertical position, Handling Specialty’s custom vertical work platforms are a favourite within the power generation industry. Lagged to the shop floor, these above-grade work platforms allow technicians the ability to rise and lower themselves to the appropriate position when […]
Personnel Lift for the Energy Industry
Overview Personnel Lift for the Energy Industry Lagged to the purchaser’s floor, this custom, electro-mechanically powered personnel lift is designed to perform 4 cycles per day, 300 days per year, in an assembly facility. This personnel lift will work in tandem with other material handling equipment like AGVs and engine lifts to perform the work. […]
In-floor Custom Personnel Lift Equipment
Overview This robust, pit-mounted, custom personnel lift equipment was engineered to perform 50 cycles per hour, 24 hours per day, 365 days per year in an automotive manufacturing plant. Each unit is capable of lifting 1500 lbs. and includes a galvanized grating platform for slip protection. Features Lockable disconnect switch. Motor overload relays. Low voltage […]