Custom Hydraulic Rotating Scissor Lifts
Overview These robust, custom, hydraulic rotating scissor lifts were engineered to position zinc plates for the smelting industry. These scissor lifts can raise and lower up to 6000 lbs., as well as rotate the zinc plates into position during the smelting process. These lifts will run 29 cycles/hr., 12 jogs/cycle, 24 hrs./day, and 310 days/year. […]
DC Battery Powered Ladle Lift
Overview A DC Battery Powered Ladle Lift removes the cords that can be pinched and severed, making the process of raising and lowering the technician safer. Since refractory firebrick in pour ladles requires continual replacement, the ladle lift replaces traditional scaffolding used in the re-bricking job. The lift is loaded into the ladle using a […]
Engine Rollover and Lift Stations
Overview Handling Specialty recently completed a 15 and 30 Ton Engine Rollover Station for the energy industry, which was placed in a state-of-the-art manufacturing facility. Handling Specialty also provided installation and commissioning of these products. The Engine Rollover Stations will be used to position reciprocating engines during manufacturing operations. Features The rollover feature, along with […]
Pit Lift for Turbine Assembly
Overview Handling Specialty engineered and manufactured this Pit Lift for Turbine Assembly – mounted in a pit to raise and lower turbine engines and gas compressors for assembly and disassembly. Simple design keeps maintenance costs low, and the ability to stop motion with a full load at any point without experiencing downward creep of the […]
Massive Work Platform for Nuclear Refurbishment
Overview Handling Specialty worked with a client in the nuclear industry to engineer and manufacture an extremely large four-post lift to be used in a test facility to train nuclear technicians in the re-tubing process for refurbishing nuclear reactors. The lift was manufactured to extremely tight tolerances to comply with Z299.2 requirements. Features Platform size […]
Telescopic Cable Boom System
Overview Handling Specialty engineered and manufactured two (2) sets of three (3) telescopic cable booms for a major electric power company in the United States. The booms will be used to carry and position 1000V electrical cables above and into a large electrical transformer so it can be tested. A collision avoidance system, as well […]